for further information contact your local stmicroelectronics sales office. may 2016 docid029226 rev 1 1/4 53L0-SATEL-I1 satellite boards based on vl53l0 x ranging and gesture detection sensor data brief features ? two satellite boar ds, integrating: ? vl53l0x 3-in-1 ranging and gesture detection sensor ? regulator: 5 to 2.8v range input voltage (output voltage: 2.8v) ? vl53l0x signal interface level shifter ? true distance measurement independent of target size and reflectance ? able to function in mu lti-module applications ? divisible board enabling use as mini-pcb breakout board, easy to integrate in customer device ? allows basic gesture recognition use case description satellite board can be us ed for easy integration into customer devices and basic gesture detection applications. thanks to its 2.8v regula tor and level shifters, the vl53l0x satellite board can be used in any application with a 2.8 to 5v supply. the pcb section supporting the vl53l0x module is perforated so that dev elopers can break off the mini pcb for use in a 2.8v supply application using flying leads. this makes it easier to integrate into development and evaluation devices due to its small form factor. www.st.com
53L0-SATEL-I1 2/4 docid029226 rev 1 vl53l0x overview the vl53l0x is the latest product based on st?s patented flightsense? technology. this is a ground-breaking technology allowing absolute distance to be measured independent of target reflectance. instead of estimating the distance by measurin g the amount of light reflected back from the object (which is significantl y influenced by color and su rface), the vl53l0x precisely measures the time the light takes to travel to the nearest object and reflect back to the sensor (time-of-flight). combining an ir emitter and a range sensor, the vl53l0x is easy to integrate and saves oems long and costly optical and mechanical design optimizations. the module is designed for low-power operation. ranging measurements can be automatically performed at user defined intervals. multiple threshold and interrupt schemes are supported to minimize host operations. note: the vl53l0x is delivered with a liner, in order to prevent potential foreign material to penetrate inside the modules holes during asse mbly process. it must be removed at the latest possible step during final assembly, and anyway before module calibration. divisible board for 2.8v supply application, the satellite board can be divide d along the red dotted line as shown in figure 1 , in order to only use the ?mini pcb?, which is easier to integrate into a customer device due to its small form factor. figure 1. satellite board layout
docid029226 rev 1 3/4 53L0-SATEL-I1 4 schematic and list of material figure 2. satellite schema tic and list of materials ordering information revision history 9 / / ; v d w h o o l w h 9 / / ; p l q l 3 & % 9 / / ; 5 1 ) 5 n & q ) & ? ) 5 n 5 1 ) 5 n 5 1 ) * 3 , 2 1 & 6 ' $ 6 & / 5 5 9 ' ' 5 5 5 5 1 & ; 6 ' 1 5 5 & q ) $ 9 & & $ $ $ $ $ $ $ $ 2 ( % 9 & & % % % % % % % % * 1 ' 5 5 5 5 5 5 5 5 5 5 5 5 5 5 1 ) 1 ) 1 ) 1 ) 1 ) 1 ) 8 7 ; 6 ( 3 : 5 - $ 9 ' ' 9 & 6 ( / $ 9 6 6 9 & 6 ( / * 1 ' * 1 ' ; 6 + 8 7 * 1 '
* 1 ' $ 9 ' ' 6 & / 6 ' $ ' 1 & * 3 , 2 9 / / ; & ? ) 9 , 1 9 6 6 & ( 9 2 8 7 1 & & ? ) 8 ; & % 0 5 * 5 1 ) 6 & / b , 6 ' $ b , * 1 ' 1 & b , , 1 7 ; 6 ' 1 b , 9 ' ' 1 & b , & q ) -
& r x o g e h r u 1 & r u * u r x q g h g , 1 7 ; 6 ' 1 1 & 1 & 6 ' $ 6 & / 9 ' ' * 1 ' table 1. ordering information order code description 53L0-SATEL-I1 two vl53l0x satellite boards table 2. document revision history date revision changes 2-may-2016 1 initial release.
53L0-SATEL-I1 4/4 docid029226 rev 1 important notice ? please read carefully stmicroelectronics nv and its subsidiaries (?st?) reserve the right to make changes, corrections, enhancements, modifications, and improvements to st products and/or to this document at any time without notice. purchasers should obtain the latest relevant in formation on st products before placing orders. st products are sold pursuant to st?s terms and conditions of sale in place at the time of o rder acknowledgement. purchasers are solely responsible for the choice, selection, and use of st products and st assumes no liability for application assistance or the design of purchasers? products. no license, express or implied, to any intellectual property right is granted by st herein. resale of st products with provisions different from the information set forth herein shall void any warranty granted by st for such product. st and the st logo are trademarks of st. all other product or service names are the property of their respective owners. information in this document supersedes and replaces information previously supplied in any prior versions of this document. ? 2016 stmicroelectronics ? all rights reserved
|
